Applications
General purpose bale handling
Model 25D, 35D, 50D and 70D Bale Clamps are general purpose
clamps that may be used for all types of bale handling applications.
Multiple textile bale handling
Model 40D Bale Clamps, with 92” and 121” opening ranges,
are specifically designed for multiple bale handling in the textile industry.
Refer to the Bale Capacity (Cotton) chart on page 4 for
maximum bale handling specifications.
Container loading & unloading
Model 40D non-sideshifting and 70D non-revolving Bale
Clamps have the valve mounted behind and below the frame. This results
in the lowest possible frame height.
Bale inverting
Model 35D, 50D and 70D Revolving Bale Clamps are available
for applications desiring load inverting capabilities.
Revolving Bale Clamps provide 3600 continuous rotational
capability to the standard non-sideshifting Bale Clamp.
|
Thin Profile Arms
The slab style arms provide a much thinner profile than
channel constructed arms and allow the driver to easily knife between tightly
stacked bales.
Ribs on the arm surface provide a secure grip without
excessive clamping force. They also give the driver good tip handling and
bale spinning capabilities.
The smooth outer arm surface protects adjacent bales from
damage.
|
High Net Lift Truck Capacity
The I-beam design eliminates unnecessary weight
and reduces horizontal center of gravity. The result is more net lift truck
capacity.
Approximate net capacities
Approximate
Truck/Attachment 0
Net Capacity — Lbs.
@24” Load Center
 |
